EV High-Voltage Shutoff Guide: Main Disable Points by Make
EV Mechanic Training Field Reference
A shop-ready reference for recognizing the main high-voltage shutdown families used across current EVs and PHEVs. Use it to find the right OEM guide faster, train your team on what to look for, and avoid dangerous assumptions around orange high-voltage components.


Read this before using the guide
This page is an educational field reference for trained personnel. It is not a substitute for the current OEM Emergency Response Guide, rescue sheet, service manual, lockout/tagout procedure, PPE requirements, or zero-voltage verification. Cutting a responder loop or removing a service disconnect does not remove stored energy from the high-voltage battery pack. Never cut orange high-voltage cables.
What this EV shutoff reference covers
Modern EVs rarely have one universal “main switch.” The shutdown point may be a first-responder cut loop, a low-voltage service disconnect, a labeled low-voltage cable, a service interlock connector, a fuse path, or a service plug. This reference groups current vehicles by the main shutdown family a technician is likely to encounter, then points you back to the official OEM/NHTSA source for the exact procedure.
Recognize faster
Use the schematics to know where to begin looking by make and platform.
Verify smarter
Pull the current OEM ERG or rescue sheet before touching a shutoff device.
Train safer
Build consistent shop habits around immobilization, PPE, LOTO, 12V isolation, wait times, and zero-voltage verification.


Tesla first-responder loop
Models: Model S, Model 3, Model X, Model Y, Cybertruck
Where to look: Front hood/frunk access panel. Look for a red first-responder loop or cable with a yellow label.
Verify before work: Confirm exact panel, secondary loop, low-voltage battery location, and wait/verification steps in the current Tesla ERG.
Main high-voltage shutdown families
These cards are designed for recognition and routing. They are not standalone procedures.
GM Ultium / Honda / Acura
Models: Blazer EV, Equinox EV, Silverado EV, Hummer EV, Lyriq, Prologue, ZDX and related Ultium vehicles
Where to look: Front compartment access cover or sight shield. Look for a yellow-tape low-voltage cable or first-responder loop.
Verify before work: Confirm whether the current ERG calls the device a low-voltage cable or first-responder loop, then follow the published double-cut method.














Ford Low Voltage Service Disconnect
Models: Mustang Mach-E, F-150 Lightning, E-Transit
Where to look: Under-hood LVSD behind or under trim. Ford ERGs distinguish urgent and non-urgent procedures.
Verify before work: Confirm the correct LVSD access, CPA/connector procedure, Pro Power Onboard considerations, and wait interval.
Hyundai / Kia / Genesis service interlock
Models: IONIQ 5/6/9, EV6, EV9, GV60, Electrified GV70/G80, Kona/Niro EV, PHEVs
Where to look: Under-hood PE compartment or fuse box. Search for service interlock, HV cut-off switch, or specified fuses.
Verify before work: Do not infer between E-GMP models. Confirm fuse/interlock labels, 12V sequence, and wait interval for the exact model year.
Nissan ARIYA / LEAF fuse and service-plug methods
Models: ARIYA, LEAF and future Nissan EV/PHEV models
Where to look: Under-hood fuse blocks and 12V battery. ARIYA service plug access is under the rear center seat cushion.
Verify before work: Use Nissan TechInfo or NHTSA for the model-year ERG and confirm the required wait period before work.
Rivian red cut loop
Models: R1T, R1S, EDV/commercial van, R2 as published
Where to look: Under-hood red cut loop with indicating label. Secondary loop or body-style differences may apply.
Verify before work: Confirm exact Rivian guide for the vehicle. Treat R1T, R1S, EDV, and R2 as related but not identical.
VW / Audi / Porsche emergency cut-out
Models: VW ID.4/ID.Buzz, Audi Q4/Q6/A6/e-tron GT, Porsche Taycan/Macan Electric
Where to look: Front emergency cut-out connector, often with a red safety tab and black connector. Some models use a cockpit/fuse-box alternate.
Verify before work: Verify MEB, PPE, or J1 platform guide. Do not use one VW/Audi/Porsche procedure for all vehicles.
Volvo / Polestar HV disconnect
Models: Volvo EX30, EX40/EC40, EX90; Polestar 2/3/4
Where to look: Front compartment near the 12V battery or model-specific removable cable/HV service disconnect.
Verify before work: Confirm the Volvo or Polestar rescue sheet by exact model and year before cutting or removing any device.










BMW / MINI / Rolls-Royce safety connector
Models: BMW i4/i5/i7/iX, MINI EVs, Rolls-Royce Spectre, BMW PHEVs
Where to look: Rescue disconnect under the bonnet or in the luggage compartment depending on model.
Verify before work: Follow the rescue-card emergency separation procedure and confirm OFF/indicator state before service work.
Mercedes-Benz EQ disconnect
Models: EQB, EQE, EQS, EQ SUVs, G 580 EQ, eSprinter, Mercedes PHEVs
Where to look: Passenger-side A-pillar base and/or cockpit fuse-box alternate on EQ examples.
Verify before work: Confirm the exact rescue card/ERG and side/location differences by model and market.
Toyota / Lexus / Subaru service plug grip
Models: Toyota bZ4X, Lexus RZ, Subaru Solterra, Toyota/Lexus PHEVs
Where to look: Service plug grip may be inside the center console, under the rear seat, or in cargo-area access depending model.
Verify before work: Use Toyota/Lexus/Subaru rescue and service information. Do not touch the service plug without proper PPE and procedure.
Stellantis EV/PHEV service disconnects
Models: Jeep 4xe, Fiat 500e, Ram ProMaster EV, Dodge/Chrysler PHEV, Maserati EV/PHEV
Where to look: Service disconnect and cut-point locations vary heavily by platform.
Verify before work: Pull the Mopar/Stellantis ERG by exact make, model, year, and powertrain. Do not generalize.
Lucid / VinFast / low-volume EVs
Models: Lucid Air/Gravity, VinFast VF8/VF9, other low-volume BEVs
Where to look: Often a front cut loop or charge-port mechanical service disconnect, but the device is strongly OEM-specific.
Verify before work: Use NHTSA or the OEM guide. Treat unfamiliar EVs as model-specific until verified.
Shop workflow: before touching the vehicle
Identify exact year, make, model, trim, battery platform, and VIN where possible.
Immobilize the vehicle, chock wheels, verify Park, and isolate the key fob, key card, or phone key.
Open the current OEM ERG/rescue sheet from NHTSA or the manufacturer source.
Compare the physical vehicle to the guide image before cutting, pulling, or disconnecting anything.
Follow the OEM order for 12V disconnection, HV shutoff, wait interval, and zero-voltage verification.
Stop if labels, wiring colors, trim access, or connector locations do not match the guide.
FAQs
Is the high-voltage shutoff always a switch?
No. On many EVs the main emergency shutdown point is a low-voltage cut loop, low-voltage service disconnect, fuse path, service interlock, or service plug. The name and location vary by manufacturer and model year.
Does cutting the responder loop make the battery safe?
No. The loop typically opens the control path that keeps high-voltage contactors closed. Stored energy remains inside the HV battery pack, and damaged systems may still present shock, fire, or reignition hazards.
Can my shop use this instead of OEM service information?
No. Use this page to route quickly to the correct family and know what to search for. The current OEM ERG, rescue sheet, and service manual control the actual procedure.
What should technicians verify after shutdown?
Technicians should follow OEM instructions for wait time and then verify zero voltage with approved HV-rated tools and PPE before service work. Never assume silence, a dark dashboard, or a disconnected 12V battery means the HV system is safe.
Official source links
These links are provided so technicians and shop owners can verify the current model-year source before work begins.
NHTSA Emergency Response Guides
U.S. Fire Administration EV Fire/Rescue Response Operations
Ford First Responder Resources
Need your team ready to work around EV high voltage?
EV Mechanic Training helps independent shops build the safety habits, diagnostic confidence, and hands-on skills needed to add EV service capability without relying on brand-specific dealership training alone.
Email: info@evmechanic.training Phone: (617) 299-9390
